

Done some work on this today.
Out with x2 Teako caps / in with Panasonic 7k hour 3900uF
New Gelid extreme thermal paste.
Now the bad.
Hdd is noisy.
Rubber feet need doing on bottom of case.
12V rail of psu is a little low 11.75V but close to spec
NO mouse
NO base for monitor
Now the good.
Very tidy unit.
667e Celeron & approx 300mb ram
Blown out all the dust bunnies.
Has widow's COA sticker
Operating system going good with MS Office etc.
Speakers sound good with cd sound.
Monitor has good colour & buttons function.
http://www.neogaf.com/forum/showthread. ... 109&page=2
see post #82
No idea about keyboard functions......this one has extra's